Project Category: Side-shoots remover

Home   /   Project

Description

The VBC GRASS REMOVING MACHINE, with its gear motor, is able to rotate the shaft and its special rubber cable with internal core up to a speed of 2000 RPM. This range allows you to remove not only the suckers at the right speed, but by increasing it, it allows you to perform a weeding function.

  • Machine with 2 shafts (right – left)
  • Hydraulic height adjustment with 1 piston
  • Side hydraulic adjustment with 1 piston
  • Hydraulic lower swing adjustment with 1 piston
  • Hydraulic upper swing adjustment with 1 piston
  • Mechanical adjustment of external head (height)
  • External arm with safety gas piston
  • Teflon rollers with rubber cables diameter 7 with internal nylon core
  • It works with 2 hydraulic gear motors (requires 150 bar of pressure and 20 liters / minute of oil)
  • Complete with pipes
  • Supporting structure in iron with stainless steel hood
  • Electronic joystick
  • Machine weight 230 kg
  • Rest platform
  • Tank group 80lt. complete with pump, multiplier, radiator and relief valve (without oil)
  • Flow divider
  • Radiator
  • Shockproof with spring for flat terrain
  • Spare thread
  • Spare skein
GALLERY ACCESSORIES

Description

The VBC SPOUTING MACHINE is designed for the elimination of vine suckers and weeds in the rows of vineyards. Suckers are eliminated by the special rubber cable of the rotor. The cable is fixed on the rotor by means of steel screws and their replacement is quick and easy. The rotation of the rotor is hydraulic, the rotation speed can be controlled by the flow regulator of the machine.

This model is attached to the rear of the tractor by means of a lift.

  • Machine with 1 right shaft and 1 left shaft
  • Hydraulic opening and closing adjustment with 2 pistons
  • Return spring on the heads
  • Special rubber cable 7mm diameter
  • Without distributor with hydraulic hoses complete with quick couplings
  • Works with 2 hydraulic motors (requires 140 bar pressure and 20 liters / minute of oil)
  • Machine completely closed from center to center of tree: 2.00mt
  • Machine completely open from center to center of tree: 2.80mt
  • Third point attack
  • The tractor requires two double-acting distributors
  • Machine weight 220 kg
  • 3-lever hydraulic distributor
GALLERY ACCESSORIES

Description

The VBC SIDE-SHOOTS REMOVER mod. SC – CHEMICAL is designed to chemically dry the suckers of the espalier vineyards by means of a special spray head. The SC remover allows to carry out a localized treatment at the base of the plant without the risk of product spilling, thus respecting the plant itself and the environment. In addition, at the time of treatment we will have the advantage of drying the suckers and at the same time the grass at the base of the plants.

  • Hydraulic height adjustament with 1 piston
  • Hydraulic adjustment lateral movement with 1 pisto
  • Hydraulic adjustment of external cylinder head opening with 1 piston
  • Mechanical adjustment of the heads swing
  • Mechanical head height adjustment
  • Complete with pipes with quick couplings
  • Top closure with cushioned PVC plates
  • Vertical closure with PVC sheets
  • 4 anti-drip jets inside
  • Bumper guard with invitation
  • Antishock on heads
  • Load-bearing structure in iron
  • Machine weight 150kg
  • 5-function electronic joystick
  • Tank group 80lt. complete with pump, multiplier, radiator and relief valve (without oil)
  • Flow divider
  • Radiator
  • Rest platform
GALLERY ACCESSORI

Description

The VBC SIDE-SHOOTS REMOVER is designed to eliminate suckers from the vine, weeds in the rows of vineyards. Suckers are eliminated by the special rubber cable of the rotor. The cable is fixed on the rotor by means of steel screws and their replacement is quick and easy. The rotation of the rotor is hydraulic, the rotation speed can be controlled by the machine’s flow regulator.

  • Machine with 2 right shafts and 2 left shafts
  • Hydraulic height adjustment with 1 piston
  • Hydraulic side adjustment with 1 double piston
  • Safety gas piston on the heads
  • Special low consumption 7mm rubber cable, helically mounted
  • 3-function hydraulic distributor with speed variator
  • Works with 4 hydraulic motors (requires 150 bar pressure and 22 liters / minute of oil)
  • Complete with pipes
  • Load-bearing structure in iron with stainless steel casings
  • For 50 HP tractors – 36.5 kw
  • Operating capacity 3.5 / 5 hectares / hour, under normal working conditions
  • Machine weight 170 kg
  • Rest platform
  • 5-function electronic joystick
  • Tank group 80lt. complete with pump, multiplier, radiator and relief valve (without oil)
  • Flow divider
  • Radiator
  • Swing piston
  • 4 lever distributor
  • Shockproof with spring for flat terrain
  • Spare thread
  • Spare skein
GALLERY ACCESSORI

Description

The VBC SIDE-SHOOTS REMOVER is designed to eliminate suckers from the vine, weeds in the rows of vineyards. Suckers are eliminated by the special rubber cable of the rotor. The cable is fixed on the rotor by means of steel screws and their replacement is quick and easy. The rotation of the rotor is hydraulic, the rotation speed can be controlled by the machine’s flow regulator.

  • Machine with 1 right shaft and 1 left shaft
  • Hydraulic side adjustment with 1 double piston
  • 7mm special rubber string
  • Powered by 2 hydraulic engines (it requires 140 bar pressure and 20 litres/min oil)
  • Pipes equipped
  • Iron main frame with stainless steel protection
  • Hydraulic height adjustment with 1 piston
  • Emergency gas piston on the heads
  • 3-controls distributor with variable speed drive
  • Machine weight 150 kg
  • Rest platform
  • 5-function electronic joystick
  • Tank group 80lt. complete with pump, multiplier, radiator and relief valve (without oil)
  • Flow divider
  • Radiator
  • Swing piston
  • 4 lever distributor
  • Shockproof with spring for flat terrain
  • Spare thread
  • Spare skein
GALLERY ACCESSORI

Description

The VBC SIDE-SHOOTS REMOVER is designed to eliminate suckers from the vine, weeds in the rows of vineyards. Suckers are eliminated by the special rubber cable of the rotor. The cable is fixed on the rotor by means of steel screws and their replacement is quick and easy. The rotation of the rotor is hydraulic, the rotation speed can be controlled by the machine’s flow regulator.

  • Machine with 2 shafts (right – left)
  • Hydraulic height adjustment with 1 piston
  • Hydraulic side adjustment with 1 piston
  • Hydraulic lower tilt adjustment with 1 piston
  • Hydraulic upper tilt adjustment with 1 piston
  • Mechanical regulation external head (height)
  • External arm with emergency gas piston
  • 7mm special rubber string
  • Powered by 2 hydraulic engines (it requires 150 bar pressure and 20 litres/min oil)
  • Pipes equipped
  • Iron main frame with stainless steel protection
  • Electronic Joystick
  • Machine weight 230 kg.
GALLERY ACCESSORI

Description

The SIDE-SHOOTS REMOVER FOR GRASS VBC, with its gear motor, manages to rotate the shaft and its special rubber cable with internal core up to a speed of 2000 RPM. This range allows you to remove not only the suckers at the right speed, but increasing it, allows you to perform a weeding function.

  • Hydraulic height adjustment with a piston
  • Hydraulic side adjustment with 1 piston
  • Safety gas piston
  • Special 7mm rubber cable with internal core
  • 3-function hydraulic distributor with speed variator
  • Works with 1 hydraulic motor (requires 150 bar of pressure and 22 liters / minute of oil – 35hp tractors)
  • Complete with pipes
  • Supporting structure in iron with hood in stainless steel
  • Machine weight 110 Kg
  • Rest platform
  • 5-function electronic joystick
  • Tank group 80lt. complete with pump, multiplier, radiator and relief valve (without oil)
  • Flow divider
  • Radiator
  • Swing piston
  • 4 lever distributor
  • Shockproof with spring for flat terrain
  • Spare thread
  • Spare skein
GALLERY ACCESSORI

Descrizione

The VBC SIDE-SHOOTS REMOVER is designed to eliminate suckers from the vine, weeds in the rows of vineyards. Suckers are eliminated by the special rubber cable of the rotor. The cable is fixed on the rotor by means of steel screws and their replacement is quick and easy. The rotation of the rotor is hydraulic, the rotation speed can be controlled by the machine’s flow regulator.

  • Hydraulic height adjustment with 1 piston
  • Safety gas piston
  • Special 7mm rubber cable
  • 3-function hydraulic distributor with speed variator
  • Complete with pipes
  • Hydraulic side adjustment with 1 piston
  • Works with 1 hydraulic motor (requires 100 bar of pressure and 16 liters / minute of oil)
  • Supporting structure in iron with hood in stainless steel
  • Machine weight 110 kg
  • Rest platform
  • 5-function electronic joystick
  • Tank group 80lt. complete with pump, multiplier, radiator and relief valve (without oil)
  • Flow divider
  • Radiator
  • Swing piston
  • 4 lever distributor
  • Shockproof with spring for flat terrain
  • Spare thread
  • Spare skein
GALLERY ACCESSORI